TheDiylife的赋予授权
向我们介绍你自己!
成就
-
thediylife评论了thediylife'sinstructableArduino RGB颜色选择器 - 从真实生活对象中选择颜色
-
thediylife评论了thediylife'sinstructable机械七个段显示时钟
I just used TinkerCAD online for these parts
-
thediylife评论了thediylife'sinstructableArduino RGB颜色选择器 - 从真实生活对象中选择颜色
You'd have to adapt the libraries and code to run the new sensor but it looks like it would work.
-
thediylife评论了thediylife'sinstructable机械七个段显示时钟
好主意,谢谢。我在考虑3D打印每一个伺服罩的小黑色护罩以覆盖它们。
-
谢谢。这是一个很好的主意,这将在小电池组上运行良好,室内工厂通常在阳光明媚的地区,因此太阳能电池板将充分充电。我会看看这个!
-
thediylife'sinstructable自动植物浇水系统使用Micro:Bitweekly stats:
-
thediylife评论了shibunagendran220的instructable使用Arduino的线圈卷绕机
这真的很酷,我喜欢你如何设法使用相对便宜的组件来构建这个!你可能想在你的代码中考虑的一件事是尝试使用伺服的变量运动速度,因此在旅行的结束。由于时间慢下来和相反的时间,你降落了两个边缘的风更多。加速旅行末端附近的伺服运动应该有所帮助。
-
thediylife评论了M.C. Langer'sinstructableTinkercad学校机器人:邪恶的Zipline机器人!
这款电机的如此独特的想法,我喜欢它!你对塑料比赛进行了投票。
-
thediylife评论了rgmcleod'sinstructableSnapmaker 2.0 A350滚动Cart
做得好,这是一个非常酷的构建!和超级详细的指示!
-
thediylife进入DIY Raspberry Pi Desktop Case With Stats Displayis a finalist in the1000次比赛比赛
-
I'm not sure where you live, but for these small items, it's probably best to look for a local company to avoid paying too much in delivery fees. There are loads of small laser cutting shops around that'll do this for you and these are really simple to cut, you can't mess them up too much.
-
thediylife评论了thediylife'sinstructable机械七个段显示时钟
如果在更新小时显示之前,我会减去12小时。
-
thediylife'sinstructableDIY Raspberry PI桌面案例与统计显示weekly stats:
-
嗨Berenv,谢谢你的提示!我认为对PI的散热要求相对较低,要么适用良好。冰塔已经有点在pi上矫枉过正,因此您只需要一点气流,以便每分钟提供几个空气变化,风扇不需要在散热器上主动吹来。对于具有较少内部体积的更紧凑的设计,因此也可能更重要的是导致的气流也是如此。
谢谢你对吃梨的伟大反馈。我喜欢在侧面板上滑入侧面板的想法。当有一个悬垂的地区时,让3D打印出来就会有点棘手,但我喜欢这个想法。此外,激光切割器在丙烯酸上产生非常沉闷的边缘,因为它通过丙烯酸(并熔化边缘)而不是切割它。完成几乎就像它被抛光一样。但是,如果用手切割,你必须小心,也许会在边缘砂边缘。
-
thediylife评论了IJustLikeMakingThings'sinstructableCNC Catan Board
This is a really cool design, well done! I'd love to be able to cast the cities, roads and knights to make metal pieces, perhaps out of pewter as its easy to work with.
-
https://www.thingiverse.com/thing:4466204
https://www.thingiverse.com/thing:4466204
-
thediylife评论了驼鹿408instructableSlide Clock
真棒的想法,真的很好!
-
thediylife'sinstructableYouTube订阅者计数器使用电子纸显示和覆盆子PI Zero W'sweekly stats:
-
thediylife评论了thediylife'sinstructable悬挂式齿轮气象站
-
thediylife评论了thediylife'sinstructableArduino停车助理 - 每次都在正确的位置停放您的汽车
Yes you can, you'll just need to change the code a bit to work with an I2C library rather than using the digital IO pins.
-
thediylife评论了thediylife'sinstructable智能室内植物显示器 - 了解您的植物需要浇水
这些湿度传感器有两种常见类型,电阻和电容。电阻更准确可靠,但随着时间的推移(几个月)遭受腐蚀。电容持续时间更长,但它们不太准确。我猜这取决于这个项目,因为这样的东西刚刚依赖于湿润和干燥的限制,电容性的工作就好了。对于需要准确监测实际水分级别的项目,您可能希望使用电阻传感器。
-
thediylife评论了thediylife'sinstructableYouTube订阅者计数器使用电子纸显示和覆盆子PI Zero W
对不起,链接没有删除。你可以在这里得到它 - https://www.the-diy-life.com/make-a-youtube-subscriber-counter-using-an-e-ink-display-and-a-raspberry-pi-zero-w /
-
thediylife评论了thediylife'sinstructable机械七个段显示时钟
嗨tarunmatliwala,您如何在串行显示器上显示时钟信息?如果您无法看到输出,您如何知道时钟模块正在工作?您需要向代码添加一些序列号线以输出时钟值并排除代码的故障以查看问题所在。如果没有你知道这个问题是什么,或者这个问题所在的情况下,我无法真正帮助你。您的设置或代码有数百件可能是错误的。你需要通过它有条理地工作,并尝试让时钟显示串行监视器上的输出。然后使用一个PWM模块获取伺服移动,然后尝试连接两个模块并获得两个伺服移动等。
-
thediylife评论了thediylife'sinstructable智能室内植物显示器 - 了解您的植物需要浇水
The pot I'm currently using doesn't have drain holes, but this is a great idea for those that do. It would also help if you got a version of these sensors with a separate "probe" or were waterproof. The trouble with these sensors is that the electronics are exposed and are at the end of the spike, so pushing it into the bottom creates a water drip path through the electronics, which would be difficult to aovid.
Thanks Amruth
Thanks Sahar
-
thediylife'sinstructable智能室内植物显示器 - 了解您的植物需要浇水weekly stats:
-
thediylife评论了thediylife'sinstructable智能室内植物显示器 - 了解您的植物需要浇水
谢谢!我想到了尝试用一块带有集成持有者的3D打印锅,这是我最终到达这个想法的方式。我不确定永久湿润/潮湿的程度如何。我喜欢你的想法将它整合到现有的锅中!
-
thediylife评论了thediylife'sinstructable机械七个段显示时钟
您的时钟模块最有可能接线问题,或模块无法正常工作。尝试再次检查连接。
-
真棒的工作,这看起来很棒!
-
thediylife评论了Pib2'sinstructable模块化的双泊
真棒的项目!
-
thediylife评论了thediylife'sinstructableArduino停车助理 - 每次都在正确的位置停放您的汽车
你在询问SR04.H库吗?这是levoloo捆绑在elegoo代码的elegoo之一,您可以通过elegoo产品链接下载作为教程包的一部分。
-
thediylife评论了Yueshi的instructableMason Jar Astronaut Sensor Light
这真的很酷!
-
thediylife评论了thediylife'sinstructable机械七个段显示时钟
谢谢你的伟大反馈。你的时钟看起来真的很棒,特别是用红色数字!
嗨,你的问题真的很广,有很多原因,它不会显示正确的时间。我建议作为一个开始:检查你的时钟模块是否正常工作,你可以在串行监视器上显示时间上的时间您的计算机?通过尝试在它们上显示其他数字或移动它们来检查您的伺服电脑。
-
thediylife进入悬挂式齿轮气象站是一个胜利者CNC Contest 2020比赛
-
thediylife进入悬挂式齿轮气象站is a finalist in theCNC Contest 2020比赛
-
thediylife'sinstructable悬挂式齿轮气象站weekly stats:
-
thediylife评论了thediylife'sinstructable悬挂式齿轮气象站
嗨Langrock,谢谢。步进电机通常会吸取大量的电流,但这些只抽出70mA。此外,它们不会通过IO引脚供电,驱动器通过Arduino的5V电源引脚供电,基本上直接连接到5V USB电源,它不会通过车载稳压器。我们正在绘制70mA(电机不会直接从USB供应中运行,所以我不认为这个特定的项目存在问题。然而,更好的练习将它们为外部供电。是,将Arduino睡觉几分钟来看,这是一个好主意。我实际上忙着看哪个Arduino板最适合长期基于电池的项目,并试图看到我可以获得多长时间。
Thank you
Hi Langrock, I've updated the link but it hasn't pulled through yet. It's just a common Chinese K40 laser cutter/engraver. Here's the new link - https://amzn.to/30OxpnY
Yes, it would be quite easy to change to Fahrenheit. You'd just need to change the number range on the temperature gear as you'd want to go higher than 50 and not as low as -10. The modification in the code would just be to change the number of steps per degree variable and then convert the Celsius values from the sensor to Fahrenheit using the formula - Celsius * 1.8 + 32
-
thediylife'sinstructableArduino土壤水分监测棒 - 永远不要忘记浇水你的植物weekly stats:
-
thediylife评论了Tuenhidiyinstructable8x24x8红色绿色蓝色LED立方体
-
thediylife'sinstructableEasy Hot Glue Tree Canvas'sweekly stats:
-
thediylife进入Crack the Code Game, Arduino Based Puzzle Boxis a finalist in theArduino比赛2020年比赛
-
这真的很酷!Awesome build!
-
thediylife评论了MadeBymorganinstructable跨界 - 如何构建由时钟制成的时钟!
这绝对是那些完全不必要的项目之一,但真的很棒!做得好。
-
thediylife评论了泰菲尔instructable联系less IoT Thermometer
真的很酷的项目!
-
thediylife评论了Technovation'sinstructableArduino控制的机器人Biped
Awesome looking robot! It would be great to see a video of it walking
-
thediylife评论了thediylife'sinstructable机械七个段显示时钟
谢谢你的伟大的反馈和祝贺build. The flashing LED dots would look great to finish it off!Yes, I've updated the 4 instances in the code on my blog. I did a quick compare to the version I had on my other computer which I uploaded to the clock and found the 4 errors. Thanks.
-
thediylife评论了thediylife'sinstructable机械七个段显示时钟
嗨Jokobaba,它看起来很棒,喜欢激光切割的想法,让数字间隔均匀,支持伺服!感谢您对代码的纠正,我会更新这个问题。
-
Amazing design, it came out looking great!
-
您无法真正将激光切割文件转换为3D打印,因为它在2D中完成。我会看看绘制安全的3D模型。
-
thediylife评论了thediylife'sinstructable机械七个段显示时钟
嗨ron,我刚刚回复你的邮件。祝你好运!
-
thediylife评论了ASCAS'sinstructable单面PCB家用制造(罚款PCB)
这是在家中制作PCB的好方法,感谢分享。
-
thediylife'sinstructable破解代码游戏,基于Arduino的拼图盒weekly stats:
-
嗨endofsilence,我希望在游戏之间打开安全盒并锁定一旦按下按钮开始新游戏。如果您希望它开始锁定,您可以将循环开头的伺服移动代码移动到循环的末尾。
-
Sorry, I forgot to put the links for the laser cutting files and the sketch in. For some reason the updates are not pulling through when I edit the Instructable, here they are:Laser Cutting File - https://www.the-diy-life.com/crack-the-code-game-built-into-a-diy-safe-puzzle-box/#laserfilesArduino Sketch - https://www.the-diy-life.com/crack-the-code-game-built-into-a-diy-safe-puzzle-box/#arduinosketch
-
thediylife评论了TnowRozinstructable[3D打印]实时卫星轨道从牵引器/跟踪器与Arduino
这是一个非常酷的项目!做得好
-
伟大的教程!
-
thediylife'sinstructableOne Arduino Playing the Chrome Dino Game on Another'sweekly stats:
-
thediylife评论了Hulkbuildinstructable印刷和组装土星V Moon Rocket - 1:96规模纸模型
真的详细说明了指导和令人敬畏的项目!
-
thediylife评论了PurpleShark'sinstructable物联网双温度数据服务器
真是太棒了。喜欢数据可以远程访问,而不只是在您自己的网络中。
-
thediylife进入机械七个段显示时钟是一个胜利者时钟比赛比赛
-
thediylife'sinstructableDIY SD卡存储多功能'sweekly stats:
-
thediylife进入机械七个段显示时钟is a finalist in the时钟比赛比赛
-
thediylife评论了smeetsanganiinstructable所有在一个数字计时器(时钟,定时器,报警,温度)
这是显示数字的一个非常酷的想法!做得好。
-
thediylife评论了thediylife'sinstructable机械七个段显示时钟
Sounds like a good idea!There's a simple solution for these PWM drivers as well. They have an enable pin, which when pulled high, disables power to all of the servos connected to them. This would be an easy way to save power for 98% of each minute.
-
thediylife'sinstructable机械七个段显示时钟'sweekly stats:
-
thediylife评论了thediylife'sinstructable机械七个段显示时钟
12V到UNO通过它的电源端口或使用GND和VIN(在电源端子条上)提供。12V电源也供应商UBEC和UBEC的5V输出进入其中一个顶部的两个端子伺服驱动器(通过带状电缆连接送到另一个电源)。如果您需要,则是一个电路图 - https://www.the-diy-life.com/mechanical-7-seging-display-clock-使用-An-Arduino-28-servos /
-
thediylife评论了thediylife'sinstructable机械七个段显示时钟
看起来我忘了添加链接,我现在在3D打印步骤中添加了它。感谢您指出了这一点!
-
thediylife评论了Looman_projects'sinstructablePlanetary Gear Clock
这真是太棒了!伟大的概念和设计。
-
thediylife评论了thediylife'sinstructable机械七个段显示时钟
伺服胶粘在间隔块上,使它们能够用胶枪直接粘在背板上。
- Show More Activities
谢谢!I haven't ever used a commercial one, so I'm not sure how well they work. I can tell you that this one doesn't work particularly well for dark colours (dark greys and blacks) due to the nature of the sensor trying to "illuminate" the object. If you spend some time setting up the calibration values to match your computer software/monitor colours then I don't see any reason why this couldn't be quite comparible to a commercial one.