Bone Sculptures

7,487

162

13

关于:我是一个可以用任何东西做任何事情的修补匠。

我有几个人说你们想看看我是如何制作我的骨雕塑的,所以我要试一试。

第一步:你可能需要的东西

there are a few things that you might need are relatively inexpensive and you don't necessarily need them but you might

1.钻有绳或无绳(我两者都用)和钻头预钻孔
2.2个螺丝钉一捆(我用的是干墙螺丝)
3.8x3 daul torq drive flat head screws (or any 3 in will work I just had these on hand)
4.Loctite 3x胶水或液体指甲
5.hammer
6.一个愿意帮忙的人(可选,我没有,但肯定会很好)
6.thing wire I used electric fence wire
7.grinder
8.用于支撑的金属或玻璃纤维杆
9.可选的月光能让你不发疯,让你慢下来,哈哈
10.很多骨头

第2步:清洁

我在田里发现的东西通常是阳光漂白的,大部分的东西都被它们弄脏了,可能是一些干的韧带。我的项目是巨大的,我通常把它们带到我的商店里,在磨床上用钢丝轮把它们清理干净,然后用清洁器般的漂白剂把它们喷洒下来。沿着这条线

步骤3:设置

在这一点上,它就像一个巨大的谜题,我把所有的碎片都分开放在我的堆里,我开始把东西放出来,然后把它们拼在一起,这张照片已经拼在一起了,但基本上就是我把它们放出来,看它们会如何工作的。

第4步:装配

Once I have a rough idea of how I want to put together I figure out how I'm going to balance them or how they will stand in my case structurally sound without breaking from their own weight keep in mind dry bones can be pretty brittle.In the picture I've taken a steel rod and Bennett in the middle add a little less than a 45 degree angle drilled a hole in the two bones that would be the knee and slid the rod in there nice and tight because that's where a lot of the weights going to be it's going to support the body I've also added screws after drilling a hole for them to avoid cracking the bones at about a 22 degree angle on the bottom of the foot the two bones that would make the ankle and foot that way I have a base and a knee

第5步:连接臀部

现在我准备好把两条腿连接到臀部和我已经组装好的下背部。我在自己的腿上用了一根玻璃纤维棒。一根钢棒和一根结实的木桩可能会起作用,就像我在两条腿上钻了孔一样,如果臀部会连接并通过臀部区域将它们滑到道琼斯。
我用螺丝来调整腿,并把它们固定在杆上,这样我就可以看到我想要它怎样站着,这样它就可以依靠自身的重量保持平衡,并且不会前后或左右倾斜。

第六步:饮酒时间

这时,你可能已经准备好拔头发了,如果你是一个人干的,就像我把所有的东西都放在一起,先钻几个洞,然后自己把它们拧在一起一样,这是一个有点压力的LOL加上当你试图催它的时候,你将不得不回去修理它,也许你最好停止喝一杯好酒什么的。R看看你在做什么

第7步:完成

Once you have everything pretty much screwed together go back through and strengthen it drilling and putting in extra screws where needed once that's finished you can start adding Glu to some of the weaker points

Step 8: Hands

把这些留到最后,因为这是你可能需要研磨机的地方。我把普通的骨头切成3块。把它们翻过来,让它们看起来像是指关节。用热胶把它们填满,然后用金属丝把它们固定住,这样我就可以弯曲它们了。我说这就像一个巨大的拼图。

第9步:后退并查看

如果你已经退后一步,看看它对你是否合适,如果它对你不合适,那么它可能不会对任何其他人,确保它的形式尽可能真实,但请记住,骨头就像棍子一样,没有一个是相同的,很少是直的。

第10步:加强

I've added a steel rod up through the back of my gargoyle and through the neck into the back of the skull that holds it because the upper body weighs about 60 pounds Plus if I need to move it it comes into 3 pieces The Gargoyle in 2 and the chopper is all one piece it stands on its own and so does the gargoyle .I think that pretty much covers it .any questions ill try to answer.but I can tell you there's a ton of trial and error in putting bones together just taking your time is the key

第11步:所有视频

https://m.facebook.com/story.php?story_fbid=10206514244525525&id=1552719225

Share

    建议

    • Trash to Treasure

      Trash to Treasure
    • 珠宝挑战

      珠宝挑战
    • Tape Contest

      Tape Contest

    13 Discussions

    0
    None
    smcmasters1

    3个月前

    I know this was posted some time ago,but I just came across it.These are incredible.Just brilliant work;such a creative way to use "waste." Some people might find it weird,gross,生病了,或者别的什么。我,however,非常尊重它。你把骨头变成了美丽的艺术品!我是一个插画家,有时会与想法作斗争——这些都是鼓舞人心的!我可以说你有一个创造性的头脑,我相信你有很多想法。I think it's so cool that you're bringing your ideas to life...or back to life!(插入“爸爸”笑话)

    0
    None
    罗杰布斯 Edbed

    Reply 3 years ago onIntroduction

    thanks heres the new one i just finished i added a switch to turn on and off the LEDs i added to the eyes

    ED1.JPG 11750605_10207188255655382_1582902883875198857_n.jpg 11752605 U 151330728531624 U 7394138494448222134 U N.JPG meand bike.jpg 11742763_10207214540312482_2534635897510347012_n.jpg
    0
    None
    罗杰布斯

    3 years ago onIntroduction

    我把这件衣服拿到了爱荷华州的Algona自行车拉力赛上,第二天就卖了,我把它展示出来了。

    11665726 U 1033201993371025 U 603045101642957684 U N.JPG
    0
    None
    tjdux

    3年前

    that is some seriously awesome artwork your creating.major props.I trip over bones here in the Midwest every time I go hiking.我可能要试一下。最糟糕的部分是说服女朋友需要一堆废骨头。

    我不是专家,但骨灰对呼吸没有危险吗?互联网是双向的,但是所有细小的灰尘(像研磨机或皮屑产生的灰尘)都对你的肺部有害。骨灰也可能有毒,但我不知道。If your not already I would look into a dust mask or respirator and possibility a vacuum or dust collection system.

    2 replies
    0
    None
    罗杰布斯 tjdux

    Reply 3 years ago onIntroduction

    my work area is plenty ventilated and a dust mask is prob a good thing if your ventilation isnt very good but like you said the net goes both ways.一件事是我没有从研磨机中产生那么多灰尘我只是把边缘磨圆了很多,你可以用砂纸,但要花更长的时间。

    0
    None
    satoko68

    3年前

    Seriously amazing.....this has got my brain into overdrive just imagining all of the possibilities.Yet another thing I need to start collecting!:-)

    0
    None
    Raitis

    3年前

    Lighted in some scary way this would make a "crap my pants" level Halloween prop!谢谢分享!

    0
    None
    安伯雷

    3 years ago onIntroduction

    This is amazing and super creepy!Thank you for sharing!