Wedding Spinner




Introduction: Wedding Spinner

About: Building design/consulting in Vancouver, WA. Resource based problem solver... in other words, I always take a minute to look in construction dumpsters :) ---the way some have to workout everyday... i have to …

These wedding spinners were the last thing I put together before our wedding.


It took one night to put them together and most of the time was spent allowing coats to dry.


  • Plywood- enough scrap to make 4-1/2" squares
  • Paint- house paint works
  • 普林斯顿ted Stickers- I used fedex to print but you can also use aninkjet sticker pack
  • Two Part Epoxy-West Systems or similar... 105+207 is what I like but any of the 200 series is perfect
  • 地毯钉-很肯定我在家里仓库支付了30包
  • Craft Arrows -this is the same set of工艺箭头I found at Michaels. The tacks it comes with are fine for construction paper but not for wood.

Step 1: Shape the Block

My scrap plywood determined the shape for the spinners. I used the max width to make 10 pieces.

I used aRyobi 10" table sawI purchased from the local habitat restore. To round the edges I used aPorter Cable routerin a Craftsman router table.

Step 2: Paint

You could certainly get more creative with painting the base.

I reached for white house paint. It was easy to coat the plywood and was on hand. Because I printed my graphics on white label paper I wanted it to just blend into the background.

Step 3: Graphics

These are pretty simple to make. I used an old version ofAdode InDesignto layout. Provided are files for MS Word and pdfs of the clipart and spinners with our instagram tag removed.

Easy to put together your own by simply googling clipart images. Or hope the files can help get you started.

Step 4: Stickers

Using stickers is just easy. I was concerned about timing and thought that glue (decoupage) could look sloppy.

Ideally I'd have liked to print on transparent paper but that wasn't an option at our fedex.

Step 5: Epoxy

There are two parts to ensure a clear finish:


If you've never worked with epoxy it can be intimidating. I had experience years ago repairing an old wooden boat. You start to learn that it is more forgiving than it first appears.

  • Measuring Devices.我拿起了一杯从Dollartree套。然后我们为基部和硬化剂匹配比率的测量仪。如果你不愿意购买完整,那就是他们卖给你的东西pump kitto ensure mixing ratios.
  • Proper Measuring.When using measuring cups the important thing is to have a tool to scrape out all the epoxy each time you fill the cup. Otherwise you don't get enough hardener (smaller cup, greater percent surface area) because a greater amount remains on the cup when you fill refill.


  • The Brush. I simply used a disposable paint brush. I wrapped the brush with packing tape leaving only 1" of brush. The dollartree set I used is particularly cheap (they've actually gotten better since). The tape helps improve any brush.
  • Application. From there brush the epoxy on. It's important to move quickly but not to rush. You have only a few minutes that the epoxy is workable. It will self level.
  • Drying.After applying I recommend a drying rack or strips of wood. Wipe away any drips after 15-30minutes.

Step 6: Finishing

The final piece includes the spinner arrow. I used a simple carpet tack. Center on the spinner and tap in place.

Hope you enjoyed the post!

I had a great time preparing for our wedding last fall. Over the next few months I plan to post more from our formal wedding. We also had abackyard weddingfor friends and neighbors that I published last summer. Very practical if you're planning for a small wedding and impacted by Covid.

Jeff & Jess

1000th Contest

Participated in the
1000th Contest

Be the First to Share


    • Holiday Decorations Speed Challenge

      Holiday Decorations Speed Challenge
    • Plywood Challenge

      Plywood Challenge
    • Battery Powered Contest

      Battery Powered Contest



    23 days ago

    lol nice! I like the spinner. It’s like their eating and then someone asks if you can get a can of soda or something. Nice!