Mason Jar Astronaut Sensor Light

34,058

455

66.

作品简介:梅森罐宇航员光传感器

宇航员梅森瓶光是一个快速而简单的周末项目。这个想法是使用梅森罐的经典形式来制作雕像头,可以用里面的LED照亮。宇航员雕像是我首先想到的。头部扩大以强调梅森罐元素,使整体比例可爱。这个概念非常简单,设计一个身体和3D打印它。连接梅森罐,电线照明部件然后连接头盔。结果非常令人惊叹,照明部件有一个音乐传感器,所以LED将与音乐一起闪烁,这使得雕像作为桌面情绪灯非常有吸引力。让我们从设计过程开始。

用品:

Mason Jar

直径70毫米,保留梅森罐Bormioli rocco,250ml。这个梅森罐是傀儡的正确尺寸。120ml较小的尺寸也可以。

link of the Mason Jar.

https://www.kitchenwarehouse.com.au/Bormioli-Rocco...

Lighting Component
音乐传感器弦灯/铜线公平灯。我挑选了3次长长的弦灯,尺寸紧凑,亮度

字符串灯的链接,来自澳大利亚的硬件商店。

https://www.bunnings.com.au/lytworx-multicolour-mu ...

The Rest

2 x 3mm木螺钉

灰色喷漆

用于胶合ABS 3D印刷部件的丙酮

File and Sandpaper for the post-printing finish

丙烯酸涂料(可选),标记,

第1步:设计过程

I designed the astronaut figurine in 3ds max. First I found some astronaut image reference, then worked out the scale of the whole figure. the yellow part is a rough estimate of the Mason jar. The one I used is roughly 70mm diameter at the lid, 88mm at the widest part in the middle, and 90 mm in total height. I made the helmet to encapsulate the whole jar so the overall shape of the head is somewhat a rough barrel form. I made the legs bending slightly to bear the load of the glass jar and enlarged the feet so the figure is stable. the body part has a hollow core to direct LED into the head cavity internally.

the backpack is kept minimum with a flat surface. I could then attach an alternative solar panel in the future.

the whole figure is then sliced into different parts for optimistic 3d printing orientation.

第2步:设置3D打印的零件

Updated: all the STL had a scale issue previously, now they should be the right scale. I have also fixed the mesh in the legs file. everything should be fine now

For the best result, I can think of. I divided the body parts into the following pieces

Left Arm, Right Arm, Left Body, Right Body, legs.

smaller parts eliminate a lot of support materials needed. I own a fairly old printer, so failed prints are quite common recently. this way can easily manage the result and time.

the helmet in two parts separate at the widest part. the helmet is meant for joining at the end of the assembly. so don't glue them together first, otherwise, the jar won't fit into the helmet.

now just be patient and let the printer do its work.

第3步:检查3D打印部件

I printed all the parts in white ABS. I use ABS filament because I can glue it with acetone for the post finish process.

打破所有的支撑并削减任何明显的接缝。

虽然我在等待头盔完成。我开始完成后完成的过程。

第4步:胶水和柱完成所有3D打印零件

我先把所有的加入接缝光滑。然后我使用丙酮在连接表面的两侧刷。胶水并将它们压在一起。差距填充2份环氧粘土,并将其再次平滑。有一些耐心。一旦腿和手臂都粘在身体上,我们就可以继续前进到涂料过程中。

Step 5: Painting Astronaut Figurine

用2层灰色底漆涂抹喷涂物。在均匀地施加底漆后,现已显示出先前难以看到的任何接缝和间隙。我使用了一份精细的金属文件来消除任何缺陷。最后,我施加了第3层底漆。等到它干燥。

to add more definition to the spacesuit I applied white acrylic paint on top of the gray primer. I used the dry brush technique, so the white paint only covers the raised surface and left the crease and concave surface gray. the helmet is done the same process.

2 layer primer -> sand ->one more layer of primer -> fully dry -> white paint cover.

一旦完成所有碎片,我们就可以转到装配。

第6步:组装

1.引导铜线通过车身芯。

2.拧在梅森罐盖上。在中间钻一个较大的洞。

3.在附加玻璃罐之前。将下头盔放在首位。推动罐子里面的所有微小的LED。然后紧紧地连接玻璃瓶。

4. glue on the upper helmet with super glue.

第7步: Complete!

Switch on the light backpack! and enjoy the light show.

音乐传感器真的使雕像交互式。它非常适合桌面显示。

请给它尝试享受!

梅森罐速度挑战

大奖
梅森罐速度挑战

6 People Made This Project!

建议书

  • 任何比赛

    任何比赛
  • Block Code Contest

    Block Code Contest
  • 使它真正的学生设计挑战

    使它真正的学生设计挑战

66.Discussions

0.
Stefang56.

3.months ago

嗨 - 这很棒!!!你能告诉我你使用过哪种音乐传感器灯?我正在找到LED条,但它们对于梅森罐子来说太大了。谢谢,来自维也纳的一切 - Stefan

0.
克里斯托弗37.

4周前回复

How did they work out? I am considering using the same lights.

I bought the mason jar from Amazon but it's too small inside the helmet.
我下载了STL并在SLIC3R中加载了它们,没有修改,并用蒙版打印。
What is the correct diameter of the neck hole?

0.
Mike3man.

8 weeks ago onIntroduction

I made this and it is one of my favorite prints! Thanks for sharing, this is a great piece adn draws a lot of compliments.

0.
Yueshi.

回复7 weeks ago

谢谢迈克。我将在未来享受可爱的东西。

0.
Yueshi.

2 months ago

wow cool I will try the technique in my other project ! i love the backpack as well. thanks for sharing mate

0.
ConvsScamaro.

2 months ago onStep 1

有没有办法获得未分开的完整3D模型,所以它可以作为一个固体件打印?

1
Yueshi.

2个月前回答

I have attached the full body file in step 3 . Please give it a try! Good Luck

0.
ConvsScamaro.

回复2个月前

Thank you so much for this! I am so excited to try this out. I will definitely be posting a "I Made It" image so you can how it came out. Thank you again!

0.
Stefang56.

3个月前Step 2

再次一个问题:在我的Slicer(Prusaslicer)中打开3D零件时,它们非常小。我应该去哪个最终规模 - 以后使梅森罐适合?
Back again: The legs will not work out for me. The walls are to thin, so in the slicer there are "empty layers" errors. Do you have other files available?

0.
Yueshi.

2个月前回答

I have updated all the files now. they are to the right scale, give it a try again;)

0.
fox-scout

回复2个月前

谢谢 - 现在很好 - 我已经打印了所有的东西,身体粘在一起。完成后会发布图片。
But there is always a last question :-) : Do you have the complete body also as STL? I was just thinking to give it a try and print it all in place. I think with some supports my Prusa can handle it - what do you think?

0.
Yueshi.

回复2个月前

嗨,我也在步骤3中附上了全身STL文件。请尝试一下。祝好运!

0.
Yueshi.

回答3.months ago

我试图将尺寸增加到1000%。它将起作用。我也再次上传了腿部文件。
如果有任何其他问题,请告诉我

0.
Stefang56.

回复2个月前

Hi, me again :-) - now I used the new uploaded legs - but it seems, they do not fit to the body. I printed both with 1000% scale, but the size/angle of the feets seems to be wrong. Pls see picture attached: blue: old legs 1000% scale, orange: old legs 1000% scale. And which scale do we have to use for the other parts (helmet, body, ...) - maybe you can upload also that one in the final size? - Thank you anyways for your great work!

0.
Yueshi.

回复2个月前

嗨,我仔细检查文件应该没问题。下载腿v2。它们是合适的尺寸。我的打印机中的腿的测量为x:102.20mm y:68.40mm z65.06mm。我认为打印机中的橙色是正确的文件。希望这可以帮助

1
MEGLYMOO87.

3.months ago

aw!所以我想我们知道谁在赢得胜利......