导语：如何制作一个魔法南瓜车
如果你没有像灰姑娘那样的渡船教母，你可以自己做一辆南瓜马车，这辆马车可以撑一个星期，而不仅仅是到午夜。
几件3D打印的配饰可以将普通的万圣节变成非凡的南瓜雕刻体验。。
Step 1: Materials
您需要的材料：
1） 直径不超过19英寸的小南瓜（如甜南瓜）。
2） 标准南瓜雕刻工具：刀，记号笔，勺子。
3） 六个1“长木螺钉（或短至3/4“）+螺丝刀
4) Tea light candle
5） 3D打印底盘、车轮、车窗、车门，可通过此链接在Repables.com上免费下载（以及打印说明）http://repables.com/r/658
Attachments
第二步：布局（门口）
Use a marker and a the doorway insert as a template to layout where the cut for the doorway will go.
Place the door in the center of the pumpkin and make sure the bottom of the doorway is parallel with the base of of the pumpkin.
第3步：布局（窗口）
使用一个标记和一个窗插页作为模板来布置窗的切割位置。窗户的顶部与门口的顶部成一条直线。画三扇窗户，相隔90度，与门道成90度。窗户的方位位置比它们有多直更重要，但也要尽力使它们笔直。车窗镶块安装后可以旋转几度使其变直。
第四步：掏空南瓜
一旦门道和窗户的布局完成，南瓜的顶部就可以被布置和移除。这个开口的尺寸可能要比传统南瓜灯上的开口小，因为侧边的切口在南瓜上很高。因此，在切断顶部之前，一定要先布置好门和窗。
有关如何雕刻南瓜灯的说明和技巧，请访问其中一个说明
//www.sledutah.com/id/How-to-Carve-a-Jacko-lantern/
Step 5: Placing the Window and Doorway Inserts
在标记线的外侧切南瓜，从里到外安装插入件。
步骤6：组装车厢底盘
The 3D printed chassis assembles in two pieces, the front and the back. Assemble them as they are shown here. They are shown in these pictures in the ready-to-attach position so they are upside down.
步骤7：连接底盘部件
The chassis pieces attach to pumpkin with wood screws. This works surprisingly well but keep in mind that you are screwing into a pumpkin and not a piece of wood so only tighten them down a much as needed for the chassis pieces not to be loose
第八步：点燃蜡烛，尽情享受。
Light the candle and enjoy your enchanted pumpkin carriage until midnight.
一个人做了这个项目！
迈克尔夫91made it!
建议
STEM竞赛
角色扮演游戏挑战
Leather Challenge
13Comments
5年前
嘿，陌生人，
无可否认，窗户很难印刷。我尝试了一些方向和组合的支持，但最好的是“面朝上”与筏和充分的支持。有很多清理涉及，但它是所有的表面指向南瓜，所以它是隐藏的。
Can I ask what printer you're using?
感谢您指出，轮子实际上是倒过来的，如果您不知道旋转180度，您将空气打印几层。如果我找到一些时间，我会重新上传的文件，使他们进入打印机软件的最佳方向来打印，使其他人不必通过你正在经历的。谢谢你对这个感兴趣。
If there is a design change you feel would make this print better that is easy to accomplish I would be more than willing to make the change for you and upload the file let me know.
5年前
I love this design. I have ordered a "Funkin" and have started to print the parts. I have printed 4 wheels ( printed nicer after I flipped it over ) and the door. I am having problems printing the window. The first print was not fully supported and the print head knocked the top section off the build plate when it started to move. Thinking the problem was not enough adhesion on the build plate I added a brim. The missing support was still causing some problems but I paused the print and rectified that and continued printing until the print stopped at 43%. I then found I could change the amount of support for overhangs ( I am using Cura ) Now with the part fully supported I started the print again - printing fine until the print stopped at exactly the same spot on the print and again 43%. I also had a problem when I first loaded all the files on to one SD card. The files would not start to print. I reloaded the files one at a time and they started to print fine. I am trying to get this project finished in time for Christmas for my grand daughter. If you can possibly check the files and upload any revisions that would be very appreciated
非常感谢你
格里
5年前
我下载文件运输和the file for the windows seems to be missing from the down load. Also it appears there is two different sizes for the wheels. Is that correct? and if so is there another file for the wheel or a different size?
再次感谢你，格瑞
回复5年前
我明白你的意思了。我上传了窗口文件，预览窗口中有它的图片，但是当我像你一样去下载它时，它不在列表中。好。。。我把它们附在这个可指示的。。。祝你好运
应该只有一个车轮尺寸
5年前
这太酷了。我想为我的孙女打印这个，但当在建设板上的项目是方式小约1毫米。实际成品尺寸是多少？
我打算从网上订购一个手工南瓜，可以等着缩放到南瓜大小，但我想在印刷品上抢先一步
谢谢，格瑞
回复5年前
I designed this in inches ('merica) and many slicers assume mm so it sounds like you want to scale it up x 25.4 (or 2540%) - that's the size of the demo shown in the photographs.
But there's nothing keeping you from going bigger if you want to do it with a regular sized pumpkin and have the build volume to accomidate the large pieces!-
回复5年前
谢谢。听起来很符合逻辑
格里
5年前
这真是太好了！投票表决。
5年前
So cool!! You could even make it out of a foam craft pumpkin and give it to a kid obsessed with Disney princesses. It would be a good doll carriage.
5年前
好吧，这太酷了。我的马车可能得用木头做，但我一定要造这个！我投你一票
5年前
最酷的南瓜雕刻创意！
5年前
这太棒了！你有没有办法分享你的stl，让其他人可以做这个？
回复5年前
是的，它们已发布/或将在下一个小时左右在Repables.com上发布。