晚安“绵羊”种植者

你想自己制作独特的种植者吗？想挑战自己为室内播种机创造3D设计吗？因为我是羊的忠实粉丝，我创造了羊的设计。在这里，我向您展示如何在TinkerCad软件的帮助下进行。让我们开始吧！

要获取STL文件，请单击邪教3d.

Supplies:

tinkercad.

Dremel 3D Printer

Dremel Digilab Slicer

PLA Filament (Red, Blue, White, Light Grey, and Yellow)

热胶

小岩石和土壤

Plants and Flowers

抓住圆环。将其放入127.62毫米的长度，宽度为57.90毫米，高度为150.81毫米。抓住一个气缸并使它成为一个洞。使长度为128.72毫米，宽度为231.58毫米，高度为152.11毫米。将它们分组在一起。

抓住半个球体的眼睛。将其缩放到

11。58 mm, the width of 11.58 mm, and the height of 5.79 mm. Duplicate it into 2. For the nose, grab a sphere. Make it the diameter of 4.63 mm. Grab a mustache from the characters tab. It is optional. Scale it into the length of 3.50 mm, the width of 19.43 mm, and the height of 4.63 mm. Grab a sphere for the mouth. Scale it into the length of 6.68 mm, the width of 13.89 mm, and the height of 5.09 mm. Duplicate it and rescale it (because the bottom lip is smaller than the upper lip) into the width of 13.89 mm, the length of 8.73 mm, and the height of 5.55 mm. Arrange them all proportionally as in the picture.

抓一个抛物面。规模62.5的宽度3.mm, the length of 61.37 mm, and the height of 53.26 mm. Drag a sphere. Scale it into the width of 37.05 mm, the length of 68.85 mm, and the height of 17.37 mm. Rotate it 22.5 degrees. See the picture. Drag another sphere. Make the diameter of 23.16 mm. Group them altogether.

把帽子放在新月形身上。复制新月形，并使它成为一个洞。将它们分组在一起。

There are some steps to make the Sheep. The result will be like this.

To create the head, drag and drop sphere into the workplane. For the size, see the picture. Rotate 15 degrees as shown in the picture.

For the ears, use sphere and scale it as shown in the picture. Put it in the upper side of Sheep's head. Rotate 45 degrees as shown in the picture. Duplicate it into 2.

要面对面，你需要眼睛和嘴巴。对于眼睛，使用球体并复制它。要嘴，用圆形屋顶，并将其复制洞。对于比例，请看图片。

对于身体的主要部分，使用圆筒并抓住另一个圆柱体孔。将它们分组在一起。制定羊毛的细节。我用羊毛的球体。复制并根据需要粘贴它。以比例和位置播放。最终结果应该在图片中。简单地解释它是非常困难的，所以我在Tinkercad嵌入了我的设计。因此，您可以看到确切的测量。最后，不要忘记通过使用球体添加羊尾。

对于1个前腿，使用2个球体并使它们成为椭圆形的形状。对于缩放，请参阅图片。不要忘记将其旋转并将它们群体组合在一起。附上身体并复制它以创建2个前腿。

对于1个后腿，您也需要3个球体，使其成为椭圆形的形状。对于缩放，请参阅图片。不要忘记将其旋转并将它们群体组合在一起。附上身体并复制它以创建2个后腿。

Grab a sphere. Scale it into the length of 77.92 mm, the width of 77.63 mm, and the height of 40.18 mm. Grab a cylinder and make the diameter into 87 mm and the height of 81.93 mm. To make the details, use spheres as accessories for the cloud. The size is up to you. Play around with it. Copy 1 layer of the cloud twice, so you have 3 layers of the cloud. Group them altogether. See the picture as final result.

抓住球体并将其放入770.2毫米的长度，宽度为77.22毫米，高度为35.31毫米。抓住另一个球体并将其缩放为81.23mm，宽度为81.44毫米，高度为41.38毫米。让它成为一个洞，一共组合球形。要详细说明，请使用球体作为云的配件。大小取决于你。和它一起玩。一共组合它们。将图片视为最终结果。

Grab a box. Scale it into the width of 212 mm, the length of 190 mm, and the height of 30 mm. Grab another box and scale it into the height of 17 mm, the width of 170 mm, and length of 192 mm. Make it a hole and group them together.

在打印之前，保存并导出所选对象到.stl文件并打印它。打开Dremel DigIleab 3D Slicer。确保对象位于基础上。选择打印设置。

我选择“高速”，填充：渐进，勾选“生成支持”。勾选构建板粘附，单击“准备并发送至打印机”。

通过用热胶胶化组装我们之前已经打印的所有部分。

Here is the final design pot.

To make it prettier, you need to prepare the planting. Add some soil and little rock to the pot. Plant it with some flowers and plants.

这是最终的播种机。你可以把它放在房子里。享受！

谢谢你阅读我的指示。

For more project idea, visit3D打印中心。