Introduction: Ducati Monster Motorcycle Miniature
Ducati Monster motorcycle is a phenomenon. It is a bike with more muscular and robust than other brands of bikes. Ducati was designed by Miguel Angel Galluzzi and produced in Italy since 1993. For knowing the whole history of Ducati Monster, please clickhereand if you would like to know further about the specification of the bike, clickhere.
So, do not throw away your old magazine. Create something awesome of it and be proud.
Vitamin bottle, with diameter of 4 cm, for rolling of magazine papers
Step 1: Preparation of Magazine Papers
Step 3: Making Spoke of the Wheels
Step 4: Making Disc Brake
Step 5: Finishing the Wheels
Step 6: Front Fender
Make a fender for front wheel. Take two rolled-magazine papers. Glue them together and flatten them. Cut into 7 cm and 8 cm. Glue them in a cross-shaped form. Set aside.
Step 7: Making the Forks
Step 8: For Steering
削减rolled-magazine纸大小of 16 cm. Fold it as shown in the picture. Glue it to the forks.
Step 9: Building the Frame
The most important when making this project is creating the main frame of motorcycle. Do it carefully. Before making it, draw a sketch for the frame on a paper. Please follow the image for making the frame. It is pretty hard to explain it in words. See the picture carefully. I already mentioned all the measurements and how and where to glue them. All the measurements are in centimeter. Assemble all the parts and you are finished in creating the frame. Next, attach the Rear Wheel.
Step 10: Exhaust
Pick 2 rolled-magazine papers, one is small and the other bigger than the first one. Cut them into 6 cm each. Glue them together. Attach to the motorcycle in the rear right side (See picture)
Step 11: Rearview Mirror
Step 12: Fuel Tank
压扁6卷杂志纸，粘在纸上。制作4 x 15厘米的矩形。将它们粘在框架周围。打印ducati怪物两次。（它是可选的）在每一面都粘在一起。
Step 13: Seat
Flatten 2 rolled-magazine papers and fold them. Make sure the size of the seat should match with the frame. Glue them on the motorcycle.
Step 14: Headlight
Flatten and roll again the paper. Make the diameter small about 2 cm. Glue it on the front of motorcycle.
Step 15: Number/License Plate Holder
Take one rolled-magazine paper. Cut it into 2.5 cm. Make it 3 pieces. Glue them together and glue at the back of motorcycle (near the seat)
Step 16: Back Stand
Grab some rolled-magazine papers. Cut them into 6 cm and make it 2 pieces. Also, cut another into 4 cm, and make it 3 pieces. Glue all one by one as shown in the picture.
Step 17: Result
Here is the result of the miniature of Ducati Monster Motorcycle.
For more project idea, visitDIY4 PRO.
Participated in the